Skip to main content
The detection settings let you tune how selective and how fast ALPR Vue is when recognising plates. If you’re scanning a busy car park you may want to capture everything quickly; if you need high accuracy for access control you might prefer a stricter threshold and a longer confirmation window. Open the Settings panel (gear icon in the header) and adjust any of the options below to match your use case.
For busy car parks or traffic cameras, lower the confidence threshold slightly (try 0.6) and make sure continuous mode is on. This combination maximises capture rate without stopping the camera between plates.
The confidence threshold is a slider from 0 to 1. It sets the minimum mean OCR confidence score a detection must reach before ALPR Vue saves it to your history.
  • Lower values (e.g. 0.5–0.65): more plates are saved, but you may see false positives or misread characters.
  • Higher values (e.g. 0.85–1.0): only clear, well-lit plates are saved, reducing noise but potentially missing some detections.
The recommended range for most situations is 0.6–0.8. The default of 0.7 balances accuracy and capture rate well for typical daylight conditions.
Confirmation time controls how many seconds the same plate must appear continuously in the camera frame before ALPR Vue considers it confirmed and saves it.
  • Increase this value (e.g. to 5 seconds) if you want to reduce false confirmations from partially visible or moving plates.
  • Decrease it (e.g. to 1–2 seconds) if you need a faster response, such as at a vehicle entrance where cars slow down only briefly.
This setting applies in normal detection mode. When a detection’s mean confidence is 0.8 or higher, the fast confirmation time is used instead.
When ALPR Vue’s OCR confidence for a detection reaches a mean of 0.8 or above, it switches to the fast confirmation window instead of the standard one. The default is 1 second.This lets clearly visible, well-lit plates be confirmed almost instantly, while ambiguous detections still go through the full confirmation period. You can increase this value if you find fast confirmations are too eager, or lower it further if your environment consistently produces very high-confidence readings.
When continuous mode is on, the camera keeps scanning after each confirmed plate. ALPR Vue will continue detecting and confirming new plates without any interaction from you.When continuous mode is off, the camera stops automatically as soon as the first plate is confirmed. This is useful for single-plate capture workflows — for example, manually logging vehicles one at a time at a checkpoint — where you want to review each plate before moving on.Toggle continuous mode back on at any time to resume uninterrupted scanning.
When skip duplicates is on, any plate whose text already appears in your current detection history is silently ignored. This keeps your history clean when the same vehicle stays in view for an extended period.Turn this off if you need to record every detection event regardless of whether that plate has been seen before — for example, when logging entry and exit times for the same vehicle.
When feedback is on, ALPR Vue plays a brief beep and triggers a short vibration (on devices that support it) each time a plate is confirmed. This lets you know a plate has been captured without looking at the screen.Toggle feedback off for silent operation in environments where sound or vibration would be disruptive, such as libraries, offices, or quiet residential areas.